Mouse Family

 This is a little mouse family I made. Plus their friend Sir Digalot.

Updated Highland Cow Microamigurumi Crochet Pattern

 This pattern is about 1/3 smaller than my first cow. I like it better because the head is all in one, rather than having separate lips to sew on, and the legs are crocheted onto the body in one piece, rather than sewing them on separately.

Head: In brown
1. 4 sc in magic circle
2. (Inc, SC)*2 - 6
3. (SC, inc)*3 - 9
4. 3 SC, 3 inc, 3 SC - 12
5. 3 SC, (1sc, inc)*3, 3 SC - 15
6. (4 SC, inc)*3 - 18
7. (5 SC, inc)*3 - 21
8. (6 SC, inc)*3 - 24
9-11. SC around - 24
12. (6 SC, Dec)*2, 5 SC, 2 dec- 20
13. (3 SC, Dec)*5 - 12
14. (2 SC, Dec)*5 - 9
15. (SC, Dec)*5 - 6
16. (Dec)*5 - 3
Finish off

Ears: In brown (Make 2)
1: 4 sc in magic circle
2: ch 1, turn, (inc, sc)*2 - 6
3: ch 1, turn, (inc, 2 sc)*2 - 8
Finish off

Nose: In white - starting in about row 6, straight down from the cow's left ear...
1: 5 sc (this row should stretch from the left ear to the right ear)
2: ch 1, pull tight and turn, Dec, sc, dec
3-4: ch 1, pull tight and turn, 3 sc
Finish off with a long tail, position the nose (allowing it to bubble a little to create nostrils) and sew the bottom down.

Tongue: in pink
1. Ch 7
2. In 2nd ch from hook SC, SC in next 2 st, hdc in next 3 SC, finish off.

Sew on a row or so below the nose. Then run the needle through the nostril hollow, catch the tip of the tongue, and pull the needle back through to make the tongue 'lick' the nose.

Horns: In white
1. 3 sc in a magic circle
2. SC around - 3
3. Inc around - 6
4. sc around - 6
5. Sc2tog, Sc2tog, inc, inc - 6
Finish off, leaving a long tail

Sew on in front of the ears.

Body & Legs:

Start with the legs.

Legs: make 4
In Black
1. In magic circle, SC 4
2. Inc around - 8
3. SC around - 8
4. (SC, SC, Dec)*2 - 6
Switch to brown
5-7. SC around - 6
8. (SC, SC, inc)*2 - 8
Finish off

Upper body: in brown
1. Join legs: Ch 2, 8sc[leg1] , Ch 4, 8sc[leg2], Ch 2, 8sc[leg3], Ch 4, 8sc[leg4] - 44
2. sc around. [2sc, 8sc, 4sc, 8sc, 2sc, 8sc, 4sc, 8sc] - 44
3-5. SC around - 44
6. 2 Dec, 18 SC, 2 Dec, 18 sc. (40)
7. Dec, 2 sc, Dec, 10 SC, Dec, 2 sc, Dec, 2 sc, Dec, 10 SC, Dec, 2 sc (34)
8. SC, Dec, 12 SC, Dec, SC, Dec, 12 SC, Dec (30)
9. Dec, SC, Dec, 5 SC, Dec, SC, 2 Dec, SC, Dec, 5 SC, Dec, SC, Dec (22)
10. 2 Dec, 3 SC, 4 Dec, 3 SC, 2 dec (14)
11. (Dec, SC)*4, Dec (9)
12. Dec around
Finish off

Lower body: in brown
1. 2sc, 4sc[leg], 4sc, 4sc[leg], 2sc, 4sc[leg], 4sc, 4sc[leg].
2. Dec, dec, dec, 4sc, dec, dec, dec, dec, dec, 4sc, dec, dec. (18)
3. Dec, 7sc, dec, 7sc. (16)
4. (Dec, 2 SC)*4 - 12
5. (Dec, SC)*4 - 8
6. Dec around
Finish off

Tail: in brown

1. Ch 3

2. SC in 2nd ch from hook, sc in next st - 2

3-5. ch 1, turn, 2 sc - 2

When the tail is the desired length, finish off and sew onto the body.

Assemble the body then sew on hair by pulling 1/2" lengths of thread through stitches and knotting them.

Trim to desired length. See previous highland cow post for more detailed instructions on the 'hair'.

Crochet Microamigurumi Highland Cow Keychain Pattern

 

I was inspired to create this little highland cow from this pattern I came across.

Materials:

Size 12 crochet hook

1 skein of brown embroidery floss

black embroidery floss

white embroidery floss

pink embroidery floss

keychain ring

Head: In brown
1. 4 sc in magic circle
2. 3 sc in 1 st , 1 sc in next st, 3 sc in 1 st, sc in next st - 8
3. 1 sc, 2 Inc, 2 sc, 2 Inc, 1 sc - 12
4-5.  sc around - 12  (mark round 4 to help in the placing of the mouth.)
6. 4 sc, 4 Inc, 4 sc - 16
7. 4 sc, (1 sc, Inc)*4, 4 sc - 20
8. (4 sc, Inc)*4 - 24
9. (5 sc, Inc)*4 - 28
10. (6 sc, Inc)*4 - 32
11-15. - 1 sc in each st around - 32
16. (6 sc, Dec)*4 - 28
17. (5 sc, Dec)*4 - 24
18. (4 sc, Dec)*4 - 20
19. (3 sc, Dec)*4 - 16
20. (2 sc, Dec)*4 - 12
21. (sc, Dec)*4 - 8
22. Dec around
Fo, leaving a long tail.
Use the end of the thread to sew the head on the body.

Bottom lip: In brown
You will be working in the 4th round of the head.
1: Turn the head upside down and, beginning in the center of the right side of the muzzle, in the 4th row, 3 sc, inc, 3 sc. This should bring you around to the center of the left side of the muzzle. - 8
2: turn, dec, sc, dec, sc, dec, finish off.

Upper lip: In brown
1: Turn the head right side up again and, working in the 4th round, starting in the same stitch you made your 8th sc for the bottom lip, 3 sc, inc, 3 sc (finishing in the same stitch you started the bottom lip in).
2: ch 1, pull tight, turn, dec, sc, dec, sc, dec
3: ch 1, pull tight, turn, dec, sc, dec, finish off.

Nose: In white - starting in the 2nd row and in the 2nd stitch in the upper lip...
1: 5 sc
2: ch 1, pull tight and turn, Dec, sc, dec
3-4: ch 1, pull tight and turn, 3 sc
5: ch 1, pull tight and turn, (sc, 2 hdc, sc) in 1st st, sc, (sc, 2 hdc, sc) in last st. 
Finish off, leaving a long tail

Ears: In brown
1: 4 sc in magic circle
2: ch 1, turn, (inc, sc)*2 - 6
3: ch 1, turn, (inc, 2 sc)*2 - 8
4: ch 1, turn, (inc, 3 sc)*2 - 12
Finish off, leaving a long tail

Horns: In white (for his left horn, I repeated round 1 and omitted the last round.)
1. 3 sc in a magic circle
2. Inc around - 6
3-4. sc around - 6
5. Sc2tog, Sc2tog, inc, inc - 6
6. Sc2tog, sc, inc, inc, sc - 7
8. 2 sc, inc, 3 sc, inc - 9
Finish off, leaving a long tail

Tongue: in pink
1. 3 sc in magic circle
2. sc around - 3
3. 3 sc, inc - 4
4-5. sc around - 4
6. (sc, inc)*2 - 6
7. sc around - 6
8. (2 sc, inc)*2 - 9
9. sc around
Finish off.

Body: In brown
1: 4 sc in magic circle
2: inc around - 8
3: sc around - 8
4: (inc, sc)*4 - 12
5: sc around - 12
6: (inc, 2 sc)*4 - 16
7: sc around - 16
8: (inc, 3 sc)*4 - 20
9: sc around - 20
Starting with round 10, you will be making a (sl st, ch 1) in the 1st stitch, then follow the rest of the pattern, starting in the 1st stitch.
10: (inc, sc)*5, (inc, 4 sc)*2 - 27
11: sc around - 27
12: (inc, 2 sc)*5, (inc, 5 sc)*2 - 34
13: sc around - 34
14: (inc, 3 sc)*5, (inc, 6 sc)*2 - 41
15-18: sc around - 41
19: (4 sc, Dec)*6, 5 SC - 35
20: sc around
21: (3 sc, Dec)*7 - 28
22: sc around
23: (2 sc, Dec)*7 - 21
24: sc around
25: (sc, Dec)*7 - 14
26: sc around
27: Dec around - 7

28: Dec closed
Finish off, leaving a tail  

Front Leg: Begin in black
1. Ch 4, turn, skip 1st ch, 2 sc in 2nd ch from hook, sc, 3 sc, working up back of chain now: sc, sc in last st - 8
2. sc around - 8
3. sc in next 3 st, sc3tog, sc in next 2 st - 6
Change to brown
4-6. sc around - 6
7. sc, inc, sc, sc, inc, sc - 8

8-11. sc around - 8
Finish off, leaving a tail

Back leg: Begin in black
1. Ch 4, turn, skip 1st ch, 2 sc in 2nd ch from hook, sc, 3 sc, working up back of chain now: sc, sc in last st - 8
2. sc around - 8
3. sc in next 3 st, sc3tog, sc in next 2 st - 6
Change to brown
4-7. sc around - 6
8. sc, inc, sc, sc, inc, SC - 8
9. 2 sc, inc, 3 sc, inc, SC - 10
10. 7 sc, inc, sc, inc - 12
11-12. sc around - 12
13. Dec around - 6

14. Dec around - 3
Finish off, leaving a tail

Tail: in brown
1. In magic circle, sc 4
2. (sc, inc)*2 - 6
3-8. sc around - 6
9. Flatten and sc across - 3
Finish off & sew on tassels

Assemble the cow, embroider the face, and attach the hair.

For the hair, I just cut thread into about 1/2" lengths then pulled a loop through a stitch and pulled the ends through the loop. Here are some pictures to help understand how.

Keychain Penguin Microamigurumi Crochet Pattern

 

My pattern is based off of this pattern. I needed mine to be a little smaller than the original, so I scaled it down somewhat, but otherwise pretty well followed The Blue Elephant's pattern.

For the Body part of the pattern - My body was a little longer and skinnier than I would have preferred. Changes I recommend for next time I make it:

#1 - Begin the white in round 6 (in black (inc, 4 sc)*3, in white (inc, 4 sc)*3).

#2 - move round 17 to before round 15 so all the (sc around) rounds are together. Then just do all the (dec) rounds after.

You will use:
Size 12 crochet hook
1 skein of black embroidery floss
1 skein of white embroidery floss
1 skein of orange embroidery floss
1 keychain ring

Head: Begin in black
1: 6 SC in magic circle
2: inc around - 12
3: (inc, sc)*6 - 18
4: (inc, 2 sc)*6 - 24
5: (inc, 3 sc)*6 - 30
6: sc around - 30
7: In black 4 sc. In white 3 sc. In black 3 sc. In white 3 sc. In black 17 sc. - 30
8: in black 3 sc. In white 4 sc. In black 3 sc. In white 4 sc. In black 16 sc. - 30
9: in black 2 sc. In white 6 sc. In black 1 sc. In white 6 sc. In black 15 sc. - 30
10-11: in black 1 sc. In white 15 sc. In black 14 sc. - 30
For the decrease round, use white over the white stitches and black over the black stitches. As you decrease, you’ll see the white section get smaller towards the bottom of the face.
12: (Dec, 3 sc)*6 - 24
13: (Dec, 2 sc)*6 - 18
14: (Dec, sc)*6 - 12
15: (Dec)*6 - 6
Finish off

Body: Begin in black
1: In magic circle sc 6
2: Inc around - 12
3: (inc, sc)*6 - 18
4: (inc, 2 sc)*6 - 24
5: (inc, 3 sc)*6 - 30
6: (inc, 4 sc)*6 - 36
Attach the white yarn and work the first half of the round in white (18) and the second half in black (18). Continue working half white and half black as you decrease.
7-14: sc around
15: (Dec, 4 sc)*6 - 30
16: (Dec, 3 sc)*6 - 24
17: sc around - 24
18: (Dec, 2 sc)*6 - 18

Beak: in orange
1. In magic circle SC 4
2. (Inc, sc)*2 - 6
3. sc around - 6
Finish off

Flipper: (make 2) in black
1. Chain 5, turn, skip 1st st, 4 sc - 4
2-5. Ch 1, turn, Inc once, then SC to end - 8
6-12. Ch 1, turn, Dec once, then SC to end - 1
Finish off.

Feet: (make 2) in orange
1. 6 sc in a magic circle
2. sc around
Finish off.

Assemble the penguin, embroider the face, and attach the keychain!

Sir Charles Digalot the Mole Crochet Pattern

I had some yarn to use up, so I just started crocheting and this little mole is what appeared!

Body: In brown
1. In magic circle, SC 6
2. Inc around - 12
3. (Inc, SC)*6 - 18
4. (Inc, 2 sc)*6 - 24
5. (Inc, 3 SC)*6 - 30
6. (Inc, 4 sc)*6 - 36
7-9. SC around
10. (Dec, 4 sc)*6 - 30
11. SC around
12. (Dec, 3 SC)*6 - 24
13. SC around
14. (Dec, 2 sc)*6 - 18
15. SC around
16. (Dec, SC)*6 - 12
17. SC around
18. (Dec)*6 - 6
19. Dec closed

Head: In brown

(The nose will look funny at first, but you will end up flipping it inside out and it will look fine.)
1. In magic circle, SC 4
2. (SC, inc)*2 - 6
3. (SC, inc)*3 - 9
4. (2 SC, inc)*3 - 12
5. (3 SC, inc)*3 - 15
6. (4 sc, inc)*3 - 18
7. (5 SC, inc)*3 - 21
8-9. SC around
Flip inside out
10. (5 SC, Dec)*3 - 18
11. (4 sc, Dec)*3 - 15
12. (3 SC, Dec)*3 - 12
13. (2 SC, Dec)*3 - 9
14. (SC, Dec)*3 - 6
15. (Dec)*3 - 3
Finish off

Arm: (Make 2) In brown
1. In magic circle, 6 sc
2-7. SC around
Stuff and finish off.

Foot: (Make 2) In brown
1. In magic circle, 6 sc
3. sc around - 6 st

4.(sc, dec)*2 - 4 st

5-7. sc around

Finish off and stuff

Tail: In brown

1. In magic circle, sc 3

2-6. sc around - 3

Finish off and stuff

(You can make this as long or short as you like.)

Tophat: In black (I used a size larger yarn for the hat and suit jacket so the pattern may need revised if you use the same size yarn.)

1. In magic circle 6 sc

2. Inc around - 12

3. In FLO, SC around - 12

4. In both loops & back loop of round 3, SC around - 12

5-6. In both loops, sc around - 12 (may need extra round)

7. In FLO, (sc, inc)*6 - 18

Finish off

Suit Jacket: In Black (white - optional) (I made this with a size larger yarn too)

1. ch 7

2. Turn, skip 1st st, sc, sc, skip 1 st, sc, sc - 4

3. Turn, ch 1, 4 sc - 4

4. turn, ch 1, 2 sc (ignore last 2 st) - 2

5. turn, ch 1, 2 sc - 2

6. turn, ch 1, 2 sc, ch 1, dc in top sc in row 4 - 4

(at this point, I was running out of enough black so I switched to white yarn. You can either switch colors or keep it all black)

7-12. turn, ch 1, 4 sc - 4 (This would be better if rows 9 & 10 had a dec at the top so the neck line doesn't buckle.)

(at this point, I switched back to black)

13. turn, ch 1, 4 sc - 4

14. turn, ch 1, 2 sc (ignore last 2 st) - 2

15. turn, ch 1, 2 sc - 2

16. turn, ch 1, 2 sc, ch 1, dc in top st of row 13 - 4

17. turn, ch 1, 4 sc - 4

18. turn, ch 1, 2 sc, ch 3, 2 sc

Finish off

Embroider face

Crochet Zebra Paci Clip Pattern

I made this with crochet thread.

Zebra Head

In black
1. 6 mc
2. Inc, SC, 2 inc, SC, inc
3. Inc, 3 SC, 2 inc, 3 SC, inc
4. Inc, 5 SC, 2 inc, 5 SC, inc
5. Inc, 7 SC, 2 inc, 7 SC, inc
6. Inc, 9 sc, 2 inc, 9 sc, inc
7. 1 SC, inc, 9 sc, inc, 2 sc, inc, 9 sc, inc, 1 SC
8. 1 SC, inc, 11 SC, inc, 2 sc, inc, 11 SC, inc, 1 SC finish off
Switch to white
Turn the nose around and, in white:

1. Ch 5, (count back 8 stitches from the last stitch you made in black and) SC in the front loop of that 8th stitch, SC in the front loop of the next stitch (the 9th stitch), ch 1, turn
2. Skip the last SC you made and SC in the 1st SC you made, SC in each of the next 4 chain stitches, 3 SC in the beginning chain stitch, now working down the back of the chain, sc in next 4 chain stitches, then SC in the front loop of the 8th st, SC in flo of next black stitch (the 7th stitch)
3. Ch 1, turn, skip 1st SC, 5 SC, inc, SC, inc, 5 sc, flo SC in next black stitch
4. Ch 1, turn, skip 1st SC, 5 SC, inc, SC, inc, SC, inc, 5 sc, flo SC in next 2 black stitches
5. Ch 1, turn, skip 1st SC, 7 sc, hdc inc, hdc, dc inc, hdC, hdc inc, 7 sc, flo SC in next 2 black stitches
6. Ch 1, turn, skip 1st SC, 4 sc, 2 hdc, 2 dc, 2 tc, 2 dc, 2 hdc, 5 SC, 2 hdc, 2 dc, 2 tc, 2 dc, 2 hdc, 4 SC, Sl st the base of the nose and finish off.

Ear (make 2)
In white:
1. Ch 5
2. Beginning in 2nd st from hook, SC, sc, hdc inc, 3 SC, hdc inc, sc, sc, Sl st in 1st st and finish off but leave long tail.
3. In black: starting on the bottom right corner of the ear, SC, SC, inc, sc, SC, in top stitch (SC, ch 3, SC), SC, SC, inc, sc, SC, finish off and weave in tail.
Sew onto the head with the white thread



Ribbon
For the ribbon, I used this pattern. Attach your black thread as described below, then follow the bookmark pattern, alternating between black and white rows.

In black, starting 3 st left of the center of the nose, attach thread and ch 50 (or however long you want your paci chain to be).
Continue with bookmark pattern.

Loop
In the center of the end of the paci ribbon, attach black thread, make a chain until it's long enough to be able to go through a paci handle, and attach it in a loop to the paci ribbon.

Embroider eyes, a smile, a tuft of hair, and sew on the clip. :-)

 

Microamigurumi Crochet Keychain Fox

Materials needed:

-reddish/brown embroidery floss

-white embroidery floss

-black embroidery floss

-size 12 crochet hook

-keychain ring

Head: Begin with white thread.
1: in white, 6 sc in mc

2: (in white - Inc, 2 dc) (In orange - Inc, 2 dc)- 8

3: (1st st of increase in orange then switch to white) - inc, 3 dc. (In orange - Inc, 3 dc) - 10

4: (in orange - Inc) (in white - 4 dc) (in orange - Inc, 4 dc) - 12

5: (in orange - Inc, dc) (in white - 4 dc) (in orange - dc, 5 Inc) - 18
6: (in orange - (Inc, 2 dc) (in white - 4 dc) (in orange - (2 dc, Inc)*3 then 2 dc) - 22
7: (in orange - 3 dc) (in white - 6 dc) (in orange - 13 dc)
8: (in orange - Inc, 2 dc) (in white - 6 dc) (in orange - (2 dc, inc)*1 then (3 dc, inc)*1 then (2 dc, inc)*1 then (3 dc)*1 - 26
9: (in orange - inc, 2 dc) (in white - 8 dc) (in orange - (2 dc, inc)*1, (1 dc, inc)*1, (2 dc, inc)*3, (1 dc)*1) - 32
10: (in orange - 4 sc) (in white - 8 sc) (in orange - 20 sc) - 32
You can finish off the white now. You'll only need orange from now on.
11:(2 dc, dec)*7, (dec, 2 dc)*2, (dec)*1 - 28
Begin stuffing the head
12: (dc, dec)*9, (dc)*1 - 19
13: (dec)*9, (dc)*1 - 10
14: (sc dec)*5 - 5
Finish off, leaving a long tail.

Ears: The placement will depend on your taste of how far apart you want them to be.
With the head facing towards you, counting down the center of the nose, count straight back to the desired row (about row 11) then count to the right and left 5-6 stitches to place your hook (this will be the outer edge of the ear).
For left ear: work with the face toward you
1: With your yarn already looped onto your hook, insert it into the spot you want to start and sc 3.
2: turn, sk 1st stitch (don't ch), tc in next st, sl st in last st, then sl st in head. Finish off.
For right ear: turn the head around so you're working from the back side then repeat the instructions for the left ear.

Body: (I don't remember exactly what I did - something like the following...)
*The increases might be a little confusing since I switch back and forth between dc and sc, but for this pattern if you have been doing dc, the increase will be a dc increase and if you have been doing sc, the increase will be a sc increase.*
In orange
1: In magic circle, dc 8
2: (dc inc)*8 - 16
3: (dc, inc)*8 - 24
4-7: dc around - 24
8: (2 dc, dec)*9 - 18
9: (in orange - 5 dc) (in white - 8 dc) (in orange - 5 dc) - 18
10: (in orange - (dc, dec)*2) (in white - (dc, dec)*2) (in orange - (dc, dec)*2) - 12

11: (in orange - 4 dc) (in white - 4 dc) (in orange - 4 dc) - 12

12: (in orange - 2 dec) (in white - 2 dec) (in orange - 2 dec) - 6

13: (in orange) dec around, finish off.

Back leg: in black
Ch 4
In back of chain, starting in 2nd ch from hook, 1: Inc, sc, (4 sc), sc, sc - 9
2-3: sc around - 9
4: 2 sc, 2 sc3tog, sc - 5
5: sc around - 5
6: sc around but switch to orange in the last stitch. - 5
In orange:
7: 4 sc, inc - 6
8: 2 inc, 3 sc, inc - 9
9: (sc, inc)*3, 3 sc - 12
10: (sc, inc)*2, (inc, sc)*2, 4 sc - 16
11: (2 sc, inc)*2, (inc, 2 sc)*2, 4 sc - 20
12: (2 sc, Dec)*5 - 16
13: (sc, Dec)*5 - 12
14: (Dec)*5 - 6
15: Dec around and finish off

Front Leg: In black
Ch 4
In back of chain, starting in 2nd ch from hook, 1: Inc, sc, (4 sc), sc, sc - 9
2-3: sc around - 9
4: 2 sc, 2 sc3tog, sc - 5
5: sc around - 5
6: sc around but switch to orange in the last stitch. - 5
In orange:
7: sc, inc, sc, inc, sc - 7
8-12: sc around - 7
Stuff leg
13: this row will close the leg, making it flat so you can sew it to the side of the fox.
Flatten the leg and crochet through both the
3 sc
14: sl st, turn, 3 sc, finish off
Finished with 11

Tail:
1: 4 sc in mc
2-3: SC around - 4
4: SC, inc, SC, inc - 6
5: (inc, SC)*3 - 9
6-13: SC around
14: flatten and SC 4 across. Finish off

After the tail is finished, add the "fur". I used mostly reddish/brown, but used some white for the tail tip.
I just cut the strands of thread into approximately 1” strips. Insert the crochet hook, pull the thread partway through, then pull the ends through the loop. Pull tight.

After I finished adding the fur, I brushed it vigorously with a hairbrush to fray it a little.

Assemble the fox, add the keychain ring, and embroider eyes, nose, and a smile!